Sioux Steam Flo^®

Simple to Operate

With few moving parts, the Steam Flo^® is simple to operate. The unit can be quickly moved into place, and can be ready to go in just minutes. Simply connect your water supply, plug into electrical and the unit is ready to go.

Quick, Continuous Steam

Steam at full operating pressure is available only 20 minutes from a cold start. After start-up, the Steam Flo^® provides a continuous supply of steam; there is no recovery time. The Steam Flo^® produces 368 lbs. of steam per hour, 5 to 10 PSI operating working pressure, burning 3.05 gallons of fuel per hour.

Rugged Design

The Steam Flo^® vessel is constructed from 1/4" boiler plate all-welded steel, and will give years of service with minimal maintenance. Low water sensor switch and automatic water feeder maintain the proper water level automatically and shut off the burner if water falls below safe levels.

The unit comes complete with oil burner and various safety controls. Included are steam pressure relief valve, high pressure limit control, stack temperature control, electrical connection, fuel tank, and leveling jack.

Portable

Mounted on wheels with 15" pneumatic tires, the Steam Flo^® can be moved by hand or truck to any location, inside or out. Trailer hitch is provided. With extra hoses, you can effortlessly provide steam for hard-to-reach places. The unit requires only 37 square feet of floor space.

Built to ASME Code/National Board Registered

The Sioux Steam Flo^® is built to stringent ASME (American Society of Mechanical Engineers) Code requirements and is permanently registered with the National Board of Boiler and Pressure Vessel Inspectors. The unit is hydrostatically factory tested and inspected to 60 PSI.

Low Maintenance

With few moving parts, the Steam Flo^®'s simple design is virtually maintenance free. Many units sold over 20 years ago are in use today.

Modular Units Provide Cost Savings

Since the Steam Flo^® does not require extended fire-up time, you can save money by operating the unit only when steam is needed. Chemical usage can be minimized or eliminated. When not in use, the unit can be wheeled away to a storage area. Two or more Steam Flo^® units can be used together to provide extra output for sterilizing or heating. The Steam Flo^® offers flexibility and portability that large, permanently-installed equipment cannot provide.

Proven Dependability

The first Steam Flo^® was sold over 35 years ago, and units are serving in a variety of industries around the world.

Available Options

Steam tarp is available (specify length and width).

Steam hoses of various types and lengths are available.

All fittings are available, depending upon application.

Standard Construction

Specifications, Leg mount with insulation option	SF11
Boiler Horsepower	10.67
Steam Output ( 212° F. Inlet)	355 LBS/HR
Firing Rate, #2 Fuel Oil	3.05 GPH
Input BTU PER-HR	427,000 BTU/HR
Maximum Steam Working Pressure	15 PSI
Operating Steam Working Pressure	5 - 10 PSI
Maximum Temperature	250° F
Heating Tube Surface Area	49 FT²
Approximate Machine Dimensions (Leg Mount)	60"L x 40"W x 51"H
Approximate Machine WT. (DRY)	900 LBS
Approximate Boiler Volume	55 Gallons
Optional Fuel Tank Capacity	36 Gallons
Approximate Efficiency	84%
Specifications, Leg mount with insulation option
Boiler HP	10.3
Steam Output (212° F Inlet)	355 LBS/HR
Approximate Insulation Cost pay back period, Based on 1000 HR/YEAR Operation	2.2 Years

All specifications are based on standard operating conditions and may vary +/- 5%. Prices on request.

Options

Portable Non-highway Trailer Option:

15" Pneumatic Tires
Trailer Hitch
36 Gallon Fuel Tank
GFCI Electrical Cord and Plug

Over the Road 2 Wheel Trailer
Skid Mounted with 36 Gallon Fuel Tank
Insulation Option:
- 1" Fiberglass Based
- Protective Stainless Steel Outer Wrap
Available as a hot Water Boiler

Index Page | Sioux Steam Flo^® | Siebring Steam | Electric Soil Sterilizers

Sioux Steam Flo®